Tractor · 41–50 HP

Massey Ferguson 246 DYNATRACK 2WD Price October 2026

Massey Ferguson 246 DYNATRACK 2WD
Price on requestex-showroom
46 HPEngine HP
2,700 ccEngine capacity

The 46 HP MF 246 DYNATRACK 2WD has a configuration detail that deserves more attention than its maximum speed: an extendable VersaTech front axle. TAFE lists a 1935 mm wheelbase for field applications and 2035 mm for haulage. Those are two documented settings, not two measurements to average into a new specification.

Put the axle setting in the purchase record

Ask the dealer which setting will be delivered, who may alter it and what procedure and restrictions the manual gives. Do not assume an adjustment can be made casually between jobs. Record the setting used for any demonstration, because access and turning observations from one configuration should not silently represent the other.

The feature is relevant to a farm that alternates field work and transport, but it does not establish a legal trailer payload or a safe load on a slope. Have the supplier approve the intended combination separately. No towing tonnage is inferred here from wheelbase or engine power.

Try the repeated direction-change task

A fully constant-mesh 12F+12R gearbox, dual-diaphragm clutch and Super Shuttle are listed. Request a demonstration of the complete prescribed forward-to-reverse sequence with the intended operator. Equal forward and reverse gear counts do not tell you which changes are synchronised or when the tractor must stop. The shuttle and synchromesh guide helps frame those questions.

Verify the hitch instead of assuming it from horsepower

The official page describes CAT-1 combi-ball links and 2050 kgf lift with lower links horizontal. For an existing attachment, have the dealer identify the supplied balls, pins and approved loaded setup. Do not assume a larger pin or a different category merely because the tractor is 46 HP.

Manual and power steering appear as alternatives; confirm the option in the quote. If comparing the 254 DYNATRACK, ask what actual requirement the extra engine rating meets. The 246 remains a distinct 46 HP model, not a cheaper price label for the 254. Obtain servicing instructions for the axle, clutch and controls before accepting the machine.

Indicative price in India

TractorKarvan, checked on 4 October 2026, lists ₹7.43–7.88 lakh ex-showroom for this named version. Treat this as an indicative India-wide market range, not a manufacturer quote or a confirmed price for your district and chosen options. Ask a local dealer for the exact equipment list and separate applicable registration, insurance, delivery and other charges in the on-road total.

Source and scope

Official Indian model specifications, checked on 4 October 2026. TAFE advises confirming current specifications and regional availability with an authorised representative. The practical assessment here is buying guidance, not a field test.

Aglist Score: 7.5/10 — Very good

7.5/10
Very good
Power & performance 4.6
Build & durability 10.0
Comfort & usability 8.1
Warranty & service reach 8.5

How we score →

Our verdict: Massey Ferguson 246 DYNATRACK 2WD

Verdict by the Aglist editorial desk

Choose the 246 DYNATRACK with a documented axle setting, steering option and approved hitch match. Its extendable wheelbase is a configuration feature, not proof of increased permissible trailer load.

Massey Ferguson 246 DYNATRACK 2WD — What works / What to watch

What works

  • Two axle settings explicitly documented
  • Super Shuttle and 12F+12R configuration
  • Telescopic stabilizer and adjustable hitch listed

What to watch

  • Axle adjustment procedure requires supplier instruction
  • Steering option must be specified
  • Published CAT-1 wording needs checking against existing implements

What farmers use it for

Best for: Mixed field-and-transport buyers who will document axle configuration and test repeated direction changes.

Massey Ferguson 246 DYNATRACK 2WD Full specifications

Engine

Engine HP46 HP
Engine capacity2,700 cc
Cylinders3
Fuel tank55 litres

Transmission · Brakes & steering

Gearbox12 Forward + 12 Reverse
Transmission typeFully constant mesh
BrakesMulti-disc oil-immersed brakes
SteeringManual / power steering; confirm supplied option
Drive2WD

Dimensions & weight · Wheels & tyres

Weight2,010 kg
Front tyre6.00 x 16
Rear tyre14.9 x 28

Massey Ferguson 246 DYNATRACK 2WD vs Direct rivals

Similar models — 41–50 HP

View all 41–50 HP →

Other Massey Ferguson models

Massey Ferguson — All models →

Owner reviews

No owner reviews yet. If you own this machine, yours will be the first.

Write a review

Massey Ferguson 246 DYNATRACK 2WD — Frequently asked questions

Which wheelbase applies to the 246 DYNATRACK 2WD?

TAFE lists 1935 mm for field applications and 2035 mm for haulage. Confirm the supplied setting and approved adjustment procedure.

Is this a 4WD model?

No. This page covers the manufacturer-listed 2WD version. Do not use a 4WD quote or axle specification for this record.

Does the axle extension establish trailer capacity?

No. Permitted loading and the whole transport combination require their own manufacturer and applicable-use checks.

Sources: masseyfergusonindia.com tractorkarvan.com

Specifications are compiled from manufacturer literature and Indian dealer sources. Prices are ex-showroom and change often — verify before buying.