Tractor

Indo Farm 3055 DI HT 2WD Price October 2026

Price on requestex-showroom
4,088 ccEngine capacity
1,800 kgLifting capacity

The Indo Farm 3055 DI HT is a distinct 50 HP-category model, not the similarly named 3055 NV or a generic 3055 DI listing. Its factory brochure identifies a four-cylinder 4088 cc engine, 215 Nm maximum torque and 2000 rpm rated speed. This review uses the Indian 2WD, 8-forward/2-reverse baseline, keeping the separate 4WD and advertised multi-speed packages apart.

What the HT specification contributes

The documented engine and torque figures give you concrete numbers to take to an implement supplier. They do not establish measured fuel economy, acres per hour or the maximum rotavator width. For soil preparation, provide the implement model, working depth and soil conditions alongside those figures. The manufacturer's 540 rpm six-spline PTO specification is a speed and connection description, not a published PTO horsepower measurement.

Compare the actual 2WD chassis

In the brochure's 2WD column, the tractor has 7.50 x 16 front tyres, 14.9 x 28 rears, a 2230 mm wheelbase and 2290 kg listed weight. Width is 1820 mm. The 4WD column has different tyres and dimensions, so a dealer offer cannot borrow the narrowness of one version and equipment from another. Ask for an access demonstration with the attachment fitted; our orchard access worksheet also works for restrictive sheds and gateways.

Controls that deserve a demonstration

The baseline brochure specifies dual clutch, side-shift constant-mesh transmission, hydrostatic power steering and oil-immersed brakes. Sit the intended operator at those controls and have the dealer demonstrate the prescribed gear and PTO procedure. Indo Farm also links a brochure advertising 16+4, but that document retains an 8+2 specification row. If ordering the extra-speed package, obtain the actual gear schedule and operating instructions in writing rather than assuming it is included here.

Lift capacity is only part of mounted-tool matching

The 1800 kg rating is measured at the lower-link ends. ADDC position, draft and mix controls are listed. Check loaded weight and centre of gravity for a seed drill or other mounted tool, not only its empty weight. Separately verify external hydraulic requirements; hitch lift capacity does not describe a remote valve's flow or circuit. A 63-litre tank is documented, but hours between refills depend on work and cannot be calculated from capacity alone.

Price scope needs clarification

A current third-party listing for the exact HT name was found, but its headline starting price lacks a clear charge breakdown and its FAQ calls it on-road without a district quotation. Other 3055 prices may describe different models. We have not adopted these as a reliable ex-showroom range. Ask for an itemised Indian quote naming HT, 2WD and the selected gearbox before comparing totals.

Sources and handover

Indo Farm India and its linked factory brochure were checked on 10 October 2026. Resolve differences against the delivered machine and its manual. Ask the authorised dealer for the service schedule, parts support and written warranty. This is an assessment of documented equipment, not a field test or a fuel-consumption measurement.

The additional gearbox leaflet was also checked for the package differences discussed above.

Our verdict: Indo Farm 3055 DI HT 2WD

Verdict by the Aglist editorial desk

Consider the 3055 DI HT when its documented engine, 540-rpm PTO and 2WD dimensions fit the intended tool. Resolve the gearbox package instead of treating every 3055 badge as identical.

Indo Farm 3055 DI HT 2WD — What works / What to watch

What works

  • - Four-cylinder engine and torque documented for the HT model.
  • - Standard brochure lists power steering, dual clutch and oil-immersed brakes.

What to watch

  • - Multi-speed advertising and specification rows need reconciliation.
  • - A reliably scoped current ex-showroom price was not established.

What farmers use it for

Best for: Buyers matching a four-cylinder 50 HP-category 2WD tractor to cultivation and mounted equipment.

Indo Farm 3055 DI HT 2WD Full specifications

Engine

Engine capacity4,088 cc
Cylinders4
Fuel tank63 litres

Transmission · Brakes & steering

Gearbox8 Forward + 2 Reverse (documented baseline)
Transmission typeConstant mesh, side shift
BrakesOil-immersed brakes
SteeringHydrostatic power steering
Drive2WD

Hydraulics & PTO

Lifting capacity1,800 kg

Dimensions & weight · Wheels & tyres

Weight2,290 kg
Wheelbase2,230 mm
Front tyre7.50 x 16
Rear tyre14.9 x 28

Indo Farm 3055 DI HT 2WD vs Direct rivals

Similar models

Other Indo Farm models

Indo Farm — All models →

Owner reviews

No owner reviews yet. If you own this machine, yours will be the first.

Write a review

Indo Farm 3055 DI HT 2WD — Frequently asked questions

Is the 3055 DI HT the same as the 3055 NV?

No. This card concerns the manufacturer’s 50 HP-category HT nameplate; NV and generic 3055 listings must not supply its specifications or price.

Does this baseline include 16+4 gears?

No. This card uses the documented 8+2 baseline. The separately advertised multi-speed package needs a confirmed order specification.

What are the documented 2WD rear tyres?

The brochure lists 14.9 x 28 for 2WD. Its 4WD tyre column is different and should not be substituted.

Sources: www.indofarm.in www.indofarm.in www.indofarm.in www.tractorfarming.in

Specifications are compiled from manufacturer literature and Indian dealer sources. Prices are ex-showroom and change often — verify before buying.